The pipe conveying system for the cutting band saw machine conveys the pipe automatically or manually when the band saw cuts it and the pipe can be removed from the machine with a turnover mechanism if necessary.
It increases the automatization level in the pipe fabricating plant and decreases the hazards during hoisting.
Specially designed conveying system for Pipe Cutting Band Saw Machine; V type polyurethane rollers same as the internal conveying of the pipe cutting band saw machine to ensure the alignment of pipes in all directions; VF step-less speed control, manual control on console (wireless remote control for option).
Pipe Diameter Applicable: DN400/DN600/DN800/DN1000
Conveying Length: Feed-in end: ≥1,000MM; Feed out end: ≥500MM
Line Length: 7.5M at the feed-in end and 7.5M at feed out the end (or depending on customers’ requirements)
Line Height: 800MM
Material of the Roller Bench: Carbon steel with the blue treated surface (coated with rubber if necessary)
Conveying Speed: 2~20M/Min
Speed Adjustment: Manual/VF step-less speed adjustment
Control System: Manual(A1)/PLC control, shared with the pipe cutting length-measuring system (or depending on the situation) (A2)
Used for pipeline transportation
After-Sale Service Guideline: ” Worry what users worry, think what users think ”
Within/beyond the warranty period, when the equipment gets out of order or is damaged, the company will provide technical consulting services without or with a charge. For customer advisory, the company will supply responses on the phone within 4 hours and written replies within 8 hours. If the customer requires, within 24 hours (within the distance of 800 KM) or within 48 hours (above 800 KM), the company will dispatch experienced engineering technical personnel to the customer site to analyze and guide maintenance. They will not leave until the fault is cleaned and the customer is satisfied.
