High-Speed Pipe End Beveling Machine: Bevel shape: V, double V, and U; applicable for the radial or axial beveling of STD wall pipe and radial beveling of thick-wall pipes; Centering-clamp from top and bottom synchronously with hydraulic motor + screw rod; radial differential feed, motorized discharge or feed/discharge controlled by the axial common motor; standard numerical control-blade without coolant.
The high-speed pipe end beveling has a beveling speed of ≤5Min /pipe bevel (DN200 SCH40).
It offers bevel cutting of cutting a pipe with other equipment such as a band saw and then machining each bevel.
The bevel quality is very good.
Pipe Diameter Applicable: DN600/DN800/DN1000/DN1200/DN1500
Pipe Wall Thickness Applicable: 4-90mm/6-180MM
Applicable Materials: Carbon steel, alloy steel, stainless steel, and cryogenic steel, etc.
Bevel Shape: U, X, V, and Double V
Cutting Direction: Radial automatic differential cutting feed or axial semi-automatic motor cutting feed; radial automatic differential cutting feed or axial automatic motor cutting feed
Retracting Direction: radial automatic motor retracting or axial semi-automatic motor retracting; radial automatic differential cutting feed or axial automatic motor cutting feed
Driven by: Motor
Clamping System: Workpiece is clamped by (screw rod) hydraulic cylinder
Bracket System: Screw lifting adjustable
Rev of the Principal Axis: 3shifts (67-123rpm)/9 shifts (34-304rpm)
Axial Displacement: 80mm(principal axis) 100mm(machine head)/150mm (principal axis), 300mm (machine head)
Widthwise Displacement: ±50mm/±100mm
Bevel Angle of Tool Rest: 0°~37.5°
Control System: Gear shift for the main shaft, VF speed change for axial direction movement and manual control; gear shift for the main shaft, VF speed change for axial direction movement, and PLC control
Mechanical Aligning: At the end of the beveling machine conveying system it can be equipped with a lifting device if necessary to automatically adjust the center elevation of the pipe to bevel pipes with different diameters
Conveying System: Can be equipped for roller conveying system if necessary
The high-speed pipe ending beveling machine is used for machining the U or V shape bevels for pipes with heavy wall thickness.
After-Sale Service Guideline: ” Worry what users worry, think what users think ”
Within/beyond the warranty period, when the equipment gets out of order or is damaged, the company will provide technical consulting services without or with a charge. For customer advisory, the company will supply responses on the phone within 4 hours and written replies within 8 hours. If the customer requires, within 24 hours (within the distance of 800 KM) or within 48 hours (above 800 KM), the company will dispatch experienced engineering technical personnel to the customer site to analyze and guide maintenance. They will not leave until the fault is cleaned and the customer is satisfied.