Welcom To Qianshan Piping
Home > Products > Pipe Beveling Product Series > differential pipe cutting and beveling machine
differential pipe cutting and beveling machine

Differential pipe cutting and beveling machine: Synchronously centering clamping with cam clamping mechanism driven by the front and back hydraulic cylinders; cutting and beveling blade disc rotates at high speed around the pipe center; when generating speed difference from 2 cutter disc of internal and external that are respectively driven by 2 servo motors, the cutting feed gear drive mechanism began to move, to drive automatic radial feed for cutting tools and beveling tools; equipped with spray cooling device;

Preset bevel parameters through PLC touch screen human-machine interface; four-column & four linear guide rail & two lifts to compose lifting system enabling automatically mechanical centering; cutting and beveling in one operation (simultaneously producing two bevels); extremely high beveling efficiency; applicable for a large amount of STD wall thickness (≤25mm) pipe bevel machining.


Differential pipe cutting and beveling machine offers a beveling capacity of ≤5Min /two-pipe bevels (DN200 SCH40).
It offers bevel cutting of cutting off pipe and two bevels simultaneously.
The bevel quality of the high-speed pipe cutting and beveling machine is good.
There is no need for cutting surplus so the material can be saved.

Technical Parameters:

Pipe Diameter Applicable: DN400/DN600
Pipe Wall Thickness Applicable: 3~12MM
Applicable Materials: Carbon steel, alloy steel, stainless steel, and cryogenic steel
Bevel Shape: V
Structure: A four-column suspending structure is used. Since it is hollow, the pipe can go into the machine’s direction and is fixed there. The cutter rotates and cuts the pipe circumferentially with high speed.
Cutting Direction: Lengthwise
Driven by: Motor
Clamping System: Clamped by cylinder
Control System: PLC VF control and Touching Screen with man-machine interface
Length-Measuring System: A mechanical length-measuring system can be provided if necessary to measure the length of the pipes as well as cut and bevel them with the supporting of the conveying system of the cutting and beveling machine.
Mechanical Aligning: An automatic lifting and lowering device is equipped to automatically adjust the center elevation of the beveling machine, so pipes with different diameters get the same bottom elevation on the production line to get the pipes in/out of the machine easily.
Conveying System: Cutting and beveling conveying systems are equipped at the front and rear sides of the beveling machine if necessary


Different pipe cutting and beveling machines are used for cutting large amounts of pipes with standard wall thickness or thin wall thickness and beveling the V-shape bevel.

After-Sale Service Commitment:

After-Sale Service Guideline: ” Worry what users worry, think what users think ”
Within/beyond the warranty period, when the equipment gets out of order or is damaged, the company will provide technical consulting services without or with a charge. For customer advisory, the company will supply responses on the phone within 4 hours and written replies within 8 hours. If the customer requires, within 24 hours (within the distance of 800 KM) or within 48 hours (above 800 KM), the company will dispatch experienced engineering technical personnel to the customer site to analyze and guide maintenance. They will not leave until the fault is cleaned and the customer is satisfied.

differential pipe cutting and beveling machine6differential pipe cutting and beveling machine7differential pipe cutting and beveling machine8differential pipe cutting and beveling machine9


*Please Feel Free To Leave Your Needs Here, A Competitive Quotation Will Be Provided According To Your Requirement.

Please Choose: